Manifolds are a very crucial part of PEX plumbing system.
The best PEX manifold is something that you must need when it is time to do a big plumbing job or planning for new construction.
The PEX manifold is a vital part that is put under immense pressure every day.
So, you should make sure that the manifold you bought must be durable and high quality so that it can provide long run service as nobody wants to change the manifolds again and again.
Now question is, which PEX manifold is the best one for your home?
We will provide you necessary tips below about which one is best and how to buy the right product for you.
Best PEX Manifolds
In a Rush? Here’s our top 5 PEX Manifolds with comparison chart that thought you would be interested in…
No | Product | Rating | Price |
1 | Viega 50243 PureFlow PEX Crimp Manabloc | 4.8/5 | $$ |
2 | Apollo 6907984CP PEX Manifold | 4.7/5 | $$ |
3 | VIVO Multi Loop Pex Manifold | 4.7/5 | $ |
4 | CMI PEX Manifold | 4.6/5 | $$ |
5 | SharkBite 22789 Copper PEX Manifolds | 4.5/5 | $ |
PEX Manifold Reviews
1. Viega 50243 PureFlow PEX Crimp Manabloc Review
Proven Quality comes from a non-corroding design. This product will not break down after any amount of moisture is introduced.
Reduced flow sounds are a very big part of this device. You do not need to listen o the water shoot through the manifold especially if it is under the floor.
Chlorine resistance helps you make sure that you do not destroy the manifold.
The local water system uses chlorine, and you should not lose your manifold because of this treatment.
PolyAlloy adapters are a big part of this product because they allow for a better fit. Plus, it is easier for you to attach to most pipes.
Homerun distribution design makes it easier for you to get good flow and simpler installation. You do not need to spend all day on the installation
Extra ports make it possible for you to attach any hose. You have enough versatility to connect all the things that you are trying to work with.
You get ratings for both hot and cold water. The hot and cold ports are marked for easy use.
2. Apollo 6907984CP PEX Manifold
16 Port PEX-B Manifold is for versatility. You can connect as many hoses as you need for big construction.
Hot and cold lines can be separated. You can pick the places where hot and cold will be filtered.
There is a single shutoff point for home use.
You get an equal number of hot and cold ports. You never need to worry about running out of one or the other.
Inlets are one inch. This makes it easier for you to fit any pipe.
You also get a 3/4 inch adapter for use when needed. The adapter means you only need one manifold.
The heavy-duty construction means this product will not break under heavy water pressure. You can use the unit in a large building where water is flowing all the time.
The device can be mounted to any surface with their special mounting brackets.
3. VIVO Multi Loop Pex Manifold Review
VIVO makes the top PEX manifolds. The construction of the loop is a big part of their manifold.
These units are used in floor heating systems that will be hidden under the flooring.
1/2″ compression connectors are perfect for most of the work that you do. This product also allows you to use a 5/8โ adapter if needed.
Automatic vent elimination is the best thing about this product because it works without any special setup. You will never have air trapped in the line because it can be evacuated by the manifold itself.
Heavy-duty mounting pieces are perfect for anyone who wants to be assured that the manifold will not move. You can mount these items on the wall or the floor.
Not compatible with SharkBite fittings. This is a big consideration if you already use SharkBite.
Heavy-duty construction allows for a lot of pressure. This is not a flimsy piece of plastic.
4. CMI PEX Manifold Review
The stainless steel construction makes this product durable for long periods of time. You could use this product instead of thinner copper.
Pressure tested construction. This is the best product when you are concerned about how much pressure is in your system.
The item is pre-assembled. You do not need to do any work to put it together on your own.
You do not need PEX tools. You can put this product together in moments.
You get a 30-day money back guarantee. You can return the product for any reason if you realize it is not working out.
The mounting brackets are very strong. You can install this product anywhere you want.
The proud comes with a condensed design sot hat it can fit in tight locations. This is perfect for home installations where you have been given little space to work with.
5. SharkBite 22789 Copper PEX Manifolds Review
The 8 point design gives you enough space for most normal homes with the best price tag.
You can arrange hot and cold as you like.
You get a closed design that will hold pressure well. This closed design in copper is much stronger than other materials.
1-Inch trunk design is much more forgiving when you are hooking up the unit. You get more versatility out of such a large port.
The 3/4 inch barb outputs are perfect for people who have a lot of variance in their construction.
There are also 1/2 inch barb ports that you can use as standard. This device allows for an adapter when you need to use different fittings.
Copper piping is all lead-free. You will be compliant with all local building codes when using this product.
You get a perfect fit with the SharkBite fittings that are made to make a vacuum as soon as they are installed. You can use all your SharkBite tools on this product.
PEX Manifolds Buyer’s Guide
Buying one of these products takes a bit of time and research because you need to know how much versatility they have, how they were built, and how they fit the pipes that you have.
You also need to know if these products will fit something like. SharkBite fitting that is very common in the industry.
Use the steps below to buy the right thing for your home or new construction.
Size
You need to find a PEX manifold that is the right size. You should buy something that is long enough for the space that you plan to fill.
You should choose a product that has enough ports for your needs, and you need to know that it can accept the amount of water flow that will come through.
Check the pressure rating on the device, and make sure that you know you can fit it into space where it is to be sued. Some spaces are simply too small for a massive new manifold.
Ports
You need to have enough ports for the purposes of your installation.
There are tiny manifolds that only have 2-4 ports. These are perfect for small spaces where you could not fit anything bigger, and it might be that you do not need to get anything bigger because you would never attach more hoses.
However, there are times when you need a product that has enough ports for a number of hoses that range from hot to cold. Get something that allows you to expand if necessary.
Construction
You need to take a look at products that are built properly. You can get a manifold that is made from copper, or you could choose something that uses stainless steel.
You could get a manifold that is made from a hybrid polymer, but it must be rated for the amount of pressure that will be introduced into the system.
Are The Inputs And Outputs Same?
The inputs and outputs on these devices might be the same or they might be different.
There are instances in which there are a large input and a small output. If that is the case, you should look at the sizes so that you know if your current pipes fit or not.
You also need to make sure that the product comes with the adapters that you need. When you can use adapters, you can adjust for a lot of variance in the hoses that are around your home or new construction.
Hot Or Cold Inputs And Outputs?
You need to check the hot and cold water rating for these manifolds.
Some of the manifolds are meant only for cold water, but some might be rated for hot water. Some will give you inputs for both hot and cold water.
It all depends on what you need and how the company has built its product.
Frequently Asked Questions (FAQs)
A manifold acts like a center of the PEX plumbing system where multiple PEX pipes connect to each other.
No, you don’t need a manifold for PEX plumbing. In case, you might need so many fittings. So, manifold minimizes the requirements of fittings.
Final Verdict
Choosing the right PEX manifold for your home or new construction job should be something that though takes seriously.
You have to be careful when looking through these products because they come in many sizes and constructions.
The PEX manifold is made from a very durable material, but that does not mean that all products are the same.
The product should fit the piping for your house, and it should be easy to install on the wall or a flat surface where you are connecting many hoses. Choose carefully when your plumbing work starts.
Leave a Reply